HP D5970A - NetServer - LCII User Manual page 60

Chapter 6
CAUTION Ensure that you the align pin-1 of the processor with pin-1 of
the processor socket or pin damage will occur.
9. Insert the second processor into the socket and close the ZIF lever to fully seat
the processor.
You should hear the ZIF lever click when it closes properly.
NOTE No speed switch settings are required for the supported 1.13
and 1.26 GHz processors. These processors rely on their own
internal switch settings, and not on system board switch
settings.
Figure 6-3. Installing the Processor on the System Board
54
Installing an Additional Processor
Pin-1
Marker