HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 98

Setting up LPD (LPR) Printing
for HP Jetdirect 175x external print server/Internet connector for USB
and HP Jetdirect 310x external print server/Internet connector for
The HP Jetdirect print server contains an LPD (Line Printer Daemon)
server module to support LPD printing. Other terms for these services
are "LPR (Line Printer Request)", from the perspective of the printing
clients, "BSD printing", and "Print Services for UNIX". These refer to
the protocol and programs associated with line-printer spooling
services that may be installed on various TCP/IP systems. These
systems include Windows NT 4.0, Windows 2000, and Mac OS.
The LPD programs include the following:
Program
Name
lpr Line Printer Request: Queues jobs for printing
lpq Line Printer Queues: Displays print queues
Line Printer Remove: Removes jobs from print
lprm
queues
lpc Line Printer Control: Controls print queues
Line Printer Daemon: Scans and prints the files if the
specified printer is connected to the system. If the
lpd specified printer is connected to another system, this
process forwards the files to an lpd process on the
remote system where the files are to be printed.
Prerequisites:
An operating system that supports LPD printing—any host
implementation of LPD that complies with the RFC 1179
document
"Administrator" access to your system
Printer properly connected to the network through the print
server —done in step
IP parameters configured on the print server —done in step
the initial setup below
Read the hardware address (also called MAC, LAN, or station
address) of the print server, either from a label on the print
server device or from the configuration page you print as the
Purpose of Program
1 of the initial setup below
USB
2 of