HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 157

Power/Status light blinking green
for HP Jetdirect 175x external print server/Internet connector for USB
and HP Jetdirect 310x external print server/Internet connector for
The power/status
print server power is OK and that the network cable is connected
properly to the print server. If the power/status
green, please try the steps below and make changes as necessary.
1. Make sure that the network cable is connected securely to the
print server.
2. Check that the network cable is plugged securely into the
hub/switch/router, and that the connection is set to the correct
network speed.
3. Check that the LINK light is ON for the port on the
hub/switch/router to which the print server is connected.
4. Your network cable may be faulty. Try a different cable.
5. If the light still does not come on, try a different port on the
hub/switch/router.
Is the power/status
If yes, click the Yes button to return to the Troubleshooting Overview
page and continue with the next step of the troubleshooting procedure.
If no, your print server has a problem that requires assistance from HP
light should be ON solid green to indicate that
network cable
light now ON solid green?
USB
light is blinking