HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 6

Interpreting the configuration page and diagnosing problems
If the page does not appear on the printer, or if it is unreadable,
go to this Troubleshooting page, and then return to this User's
Guide to continue with the installation.
6. You can use the clip attached to the bottom of the print server
to mount it to the printer or to a table or wall. Use either the
supplied sticky tape or the mounting screw holes. Or you can
pull off the clip.
Next, install software.
©2000, 2001 Hewlett-Packard Company