HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 123

Indicates the current AppleTalk configuration status.
Status
Read the print server is awaiting data.
Disabled AppleTalk was manually disabled.
Initializing the print server is registering the node address or
name. An additional status message may also be displayed.
An error code and message
The name of the printer on the AppleTalk network. A number n after the name
Name
indicates that there are multiple devices with this name, and this is the nth
instance of the name.
The name of the AppleTalk network zone on which the printer is located.
Zone
The type of the printer being advertised on the network. Two types can be
Type 1:
displayed.
Type 2:
The AppleTalk Network Number on which the print server is currently
Network
operating.
Number
The AppleTalk Node Number that the print server chose for itself as part of its
Node
initialization sequence.
Number
Note: The AppleTalk phase 2 (P2) parameter is preconfigured on the print
server.
Back to Top
DLC/LLC Protocol Information
Provides the current status and parameter values for the DLC/LLC network protocol.
This section appears only for the 310x.
Message
Indicates the current DLC/LLC configuration status.
Status
Ready the print server is awaiting data.
Disabled DLC/LLC was manually disabled.
Initializing the print server is registering the node address or
name. An additional status message may also be displayed.
An error code and message
Back to Top
Error Messages
Error Code and
Message
02
LAN ERROR-
INTERNAL
LOOPBACK
are displayed if the print server is not ready.
are displayed if the print server is not ready.
During self-test, the print server detected an internal loopback test error.
The print server may be faulty. If the error persists, replace the print
server.
Description
Description