HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 73

Network Statistics
Protocol Info
Configuration Page
Refresh Rate
Configuration:
Network Settings
Support Info
USB Settings
Other Settings
Network Settings
TCP/IP tab
IPX/SPX tab
AppleTalk tab
DLC/LLC tab
SNMP tab
Networking
Click on the
Configuration
in the left column of the page,
Network Settings
pages allow you to set or change configuration parameters for
TCP/IP, IPX/SPX, AppleTalk, and SNMP protocols. To assign a parameter setting,
enter the desired value and click
Notes
If you enter or change a configuration parameter value, click
your change, or click
Changes to the IP address will close the connection to the embedded web
server. To re-establish a connection, use the new IP address.
TCP/IP settings
Networking
Click on the
Configuration
in the left column of the page, select
TCP/IP
select the tab in the second row of tabs across the page. To assign a
parameter setting, enter the desired value and click
tab at the top of the web page. (Make sure that beneath
Network Settings
[Apply]
.
[Cancel]
to erase your change.
TCP/IP
tab. If the tab is not highlighted, then beneath
TCP/IP Settings
is selected.) The
[Apply]
Network Settings
, and then
[Apply]
.
to enable