Selecting Your Printer - HP Jetdirect 310x - Print Server For Fast Ethernet User Manual

1. Select the Settings icon from the scrolling icon list. The Please
Select a Setting: dialog box appears.
2. Select Printer Zone in the list and click Edit. The Select a
Zone dialog box appears.
3. Select your preferred network zone from the Select a Zone: list
and click Set Zone.
4. To exit, select Quit from the File menu.
5. Notify everyone on your network of the new zone for your
printer so they can select the printer in the Chooser.

Selecting Your Printer

1. Select the Chooser from the Apple menu.
2. Select the printer icon for use with your printer. If the
appropriate printer icon does not appear in the Chooser, or you
are not sure which icon to select for your printer, see
the Printer Software
3. If AppleTalk is not active, an alert dialog box appears on your
screen. Select OK. The Active button turns on.
If your network is linked to other networks, the AppleTalk
Zones list dialog box appears in the Chooser.
4. If applicable, select the zone in the AppleTalk Zones scrolling
list where your printer is located.
5. Select the printer name you want to use from the list of printer
names in the upper-right area of the Chooser.
If your printer is the only name listed in the dialog box,
you must still select it. Your printer remains selected
until you select a different printer with the Chooser.
If the printer's name does not appear in the list, make sure
the following tasks have been performed:
A READY message should appear if the printer has a control
panel display. See
above.
The printer is turned on and is online.
The print server is connected to the printer and to
the network.
The printer cable connections are secure.
troubleshooting
Installing
for more information.