HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 36

TFTP configuration file
To provide additional configuration parameters for your HP Jetdirect print server, such as SNMP (Simple Network
Management Protocol) or non-default settings, an additional configuration file can be downloaded using TFTP. This
TFTP configuration file's relative path name is specified in the BOOTP reply using the vendor-specific tag "T144" or
the standard BOOTP tag "ef" in the /etc/bootptab file.
Example of a TFTP configuration file. Lines starting with "#" are remarks not included in the file.
#
# Example of an HP Jetdirect TFTP Configuration File
#
# Allow only Subnet 192.168.10 access to peripheral.
# Up to 10 "allow" entries can be written via TFTP.
# Up to 10 "allow" entries can be written via Telnet or embedded web server.
# "allow" may include single IP addresses.
#
allow: 192.168.10.0
#
#
# Disable Telnet.
#
telnet: 0
#
#
# Enable the embedded web server.
#
ews-config: 1
#
#
# Detect SNMP unauthorized usage.
#
authentication-trap: on
#
#
# Send Traps to 192.168.10.1.
#
trap-dest: 192.168.10.1
#
#
# Specify the Set Community Name.
#
set-community-name: 1homer2
#
# End of file
TFTP configuration file parameters
The following types of TFTP parameters are listed and described in tables below. You can click on a category below, to
jump to the list.
General parameters
TCP/IP: main parameters
TCP/IP: print option
TCP/IP: raw print port
TCP/IP: access control
TCP/IP: other parameters
SNMP parameters
IPX/SPX parameters
AppleTalk parameters
DLC/LLC parameters
255.255.255.0
parameters
parameters
parameters