HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 64

IPX/SPX parameters for Telnet
Telnet Parameter
Enables or disables IPX/SPX protocol operation on the print server:
0 Disables.
ipx-config
1 (default) Eenables.
A user-assigned alphanumeric name assigned to the print server (31 characters maximum). By
ipx-unitname default, the name will be NPIxxxxxx, where xxxxxx are the last six digits of the hardware
address (MAC or LAN address).
(read-only parameter) Identifies the IPX network and node numbers detected on the network, in
the form NNNNNNN:hhhhhhhh (hexadecimal), where NNNNNNNN is the network number and
Address
hhhhhhhh is the hardware address (MAC or LAN address) of the print server.
Specifies the IPX frame type setting, one of the following: AUTO (default), EN_SNAP,
ipx-frametype
EN_8022, EN_8023, EN_II, TR_8022, TR_SNAP.
Specifies the time interval (1–3600 seconds) that the print server waits between Service
Advertising Protocol (SAP) broadcasts on the network. The default is 60 seconds. 0 disables
ipx-sapinterval
SAP broadcasts.
An alphanumeric string, up to 31 characters, that specifies the name of the Novell Directory
ipx-nds-tree
Services (NDS) tree for this print server.
An alphanumeric string, up to 256 characters, that specifies the NDS context for the print
ipx-nds-context
server.
Specifies the time interval (1–255 seconds) that the print server will wait to check for print jobs
ipx-job-poll
in a print queue. The default is 2 seconds.
Enables or disables printing an IPX banner page using the Printer Job Language (PJL):
0 Disables.
ipx-banner
1 (default) Enables.
Enables or disables IPX end-of-job notification using PJL:
0 Disables.
ipx-eoj
1 (default) Enables.
SNMP trap destination list must have a trap daemon to listen to those traps.
Description and Values