HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 8

Tools for changing configuration and for
managing
Software tools summary: describes a variety of software tools that you
can use to install, configure, and manage a network printer. These tools
cover a variety of functions in a variety of operating environments. In
general, they allow you to set parameters for the various
below...
Embedded web server: describes the web server contained within the
print server. You can use this tool to configure and manage the print
server.
HP Web Jetadmin: used to install, configure, and/or monitor the
networked printer, this software is available at
http://www.hp.com/support/net_printing.
Security for configuration: describes the security offered by the various
ways of configuring and managing the print server.
Protocols
The following protocols, and protocol-specific configurations and tools,
are supported by the print server.
TCP/IP: includes an overview of TCP/IP, as well as information
on these methods of applying TCP/IP parameters to the print server:
DHCP: a tool for autoconfiguration
BOOTP: a tool for autoconfiguration
TFTP: a tool for extended autoconfiguration
RARP: a tool on some systems for configuring an IP address
Telnet: a tool for configuration and monitoring the print
server
embedded web server: a tool for configuration and
management
ports for IP access reference summary
moving the print server to another IP network: notes
LPD (line printer daemon) printing: can be set up using these
instructions
FTP printing: [for 310x only, not for 175x] can be set up using
protocols listed
LPD