Changing The System Administrator Password - Xerox Phaser 3330 System Administrator Manual

Initial Setup

Changing the System Administrator Password

Xerox recommends that you change the default system administrator password after you configure the
printer. Be sure to store the password in a secure location. The default password is 1111.
1. In Xerox ® CentreWare
Click Maintenance > Administrator Password.
2.
3. Type the password, then type the password again to verify.
To save the new password, for Select to save new password, select the check box.
4.
5. Click Save.
18 Xerox Phaser 3330 Printer
® ®
System Administrator Guide
® Internet Services, click Properties.