Create Secure Virtual Drives - Lenovo ThinkServer RD240 Software User's Manual

3.4.2.1 Change the Security Key Identifier
3.4.2.2 Change the Security Key
3.4.2.3 Add or Change the Pass Phrase
3.4.3

Create Secure Virtual Drives

3.4.3.1 Simple Configuration
You have the option to edit the security key identifier. If you plan to
change the security key, it is highly recommended that you change the
security key identifier. Otherwise, you will not be able to differentiate
between the security keys.
You can select whether you want to keep the current security key
identifier or enter a new one. To change the security key identifier, enter
a new security key identifier.
You can choose to keep the current security key or enter a new one. To
change the security key, you can either enter the new security key or
accept the security key that the controller suggests.
You have the option to add a pass phrase or change the existing one. To
change the pass phrase, enter the new pass phrase. To keep the existing
pass phrase, enter the current pass phrase. If you choose this option,
you must enter the pass phrase whenever you boot your server.
This procedure updates the existing configuration on the controller to use
the new security settings.
You can create a secure virtual drive and set their parameters as desired.
To create a secure virtual drive, select a configuration method. You can
select either simple configuration or advanced configuration.
If you select simple configuration, select the redundancy type and drive
security method to use for the drive group.
See Section 8.1.2, "Creating a Virtual Drive Using Simple Configuration"
for the procedures used to select the redundancy type and drive security
method for a configuration.
Workflow 3-5