Lenovo ThinkServer RD240 Software User's Manual page 269

Figure 8.12 Create Virtual Drive Summary Window
15. Click Back to return to the previous screen to change any selections
or click Finish to accept and complete the configuration.
The new storage configuration will be created and initialized.
Note: If you create a large configuration using drives that are in
powersave mode, it could take several minutes to spin up
the drives. A progress bar appears as the drives spin up.
If any of the selected unconfigured drives fail to spin up, a
box appears to identify the drive or drives.
After the configuration is completed, a dialog box notifies you that the
virtual drives were created successfully. If more drive capacity exists,
the dialog box asks whether you want to create more virtual drives.
If no more drive capacity exists, you are prompted to close the
configuration session.
16. Select Yes or No to indicate whether you want to create additional
virtual drives.
If you select Yes, the system takes you to the Create Virtual Drive
screen, as shown in
whether you want to close the wizard.
17. If you selected No in
you want to close the wizard.
If you select Yes, the configuration procedure closes. If you select
No, the dialog box closes and you remain on the same page.
Creating a New Storage Configuration
Figure 8.3. If you select No, the utility asks
step 16, select Yes or No to indicate whether
8-17