Lenovo ThinkServer RD240 Software User's Manual page 117

Figure 4.22 WebBIOS Virtual Drive Definition Screen
Note: The WebBIOS Configuration Utility shows the maximum
available capacity while creating the RAID 10 drive group.
In version 1.03 of the utility, the maximum size of the
RAID 10 drive group is the sum total of the two RAID 1
drive groups. In version 1.1, the maximum size is the size
of the smaller drive group multiplied by two.
15. Change the virtual drive options from the defaults listed on the
screen as needed.
Here are brief explanations of the virtual drive options:
•
RAID Level: The drop-down menu lists the possible RAID levels for
the virtual drive. Select RAID 10.
•
Stripe Size: The stripe size specifies the length of the data
segments that the RAID controller writes across multiple drives, not
including parity drives. For example, consider a stripe that contains
64 KB of drive space and has 16 KB of data residing on each drive
in the stripe. In this case, the stripe size is 64 KB and the strip size
is 16 KB. You can set the stripe size to 8, 16, 32, 64, 128, 256, 512,
and 1024 Kbytes. A larger stripe size produces higher read
Creating a Storage Configuration 4-41