Lenovo ThinkServer RD240 Software User's Manual page 162

4-86
(such as the creation of a new virtual drive or the removal of a drive) an
event message is generated and is stored in the controller NVRAM.
You can use the WebBIOS CU to view these event messages. To do this,
click Events on the main WebBIOS CU screen. The Event Information
screen appears, as shown in
Figure 4.55 Event Information Screen
The right side of the screen is blank until you select an event to view.
The First Sequence and Last Sequence fields in the upper left of the
screen show you how many event entries are currently stored.
To view event information, follow these steps:
1. Select an Event Locale from the menu. For example, select
Enclosure to view events relating to the drive enclosure.
2. Select an Event Class: Information, Warning, Critical, Fatal, or Dead.
3. Enter a Start Sequence number, between the First Sequence and
Last Sequence numbers. The higher the number, the more recent
the event.
WebBIOS Configuration Utility
Figure 4.55.