Set Patrol Read Delay Interval; Bios-Related Properties - Lenovo ThinkServer RD240 Software User's Manual

Table 5.13 Set Patrol Read Options
Convention
MegaCli –AdpPR –Dsbl|EnblAuto|EnblMan|Start|Stop|Info |
SSDPatrolReadEnbl | SSDPatrolReadDsbl | {-SetStartTime yyyymmdd hh} |
maxConcurrentPD -aN| -a0,1,2|-aALL
Description Sets Patrol Read options on a single controller, multiple controllers, or all controllers:
-Dsbl: Disables Patrol Read for the selected controller(s).
-EnblAuto: Enables Patrol Read automatically for the selected controller(s).
This means Patrol Read will start automatically after the controller initialization is
complete.
-EnblMan: Enables Patrol Read manually for the selected controller(s). This means
that Patrol Read does not start automatically; it has to be started manually by
selecting the Start command.
-Start: Starts Patrol Read for the selected controller(s).
-Stop: Stops Patrol Read for the selected controller(s).
-Info: Displays the following Patrol Read information for the selected controller(s):
•
•
•
SSDPatrolReadEnbl: Enable the patrol read operation (media scan) on a SSD.
SSDPatrolReadDsbl: Disable the patrol read operation (media scan) on a SSD.
SetStartTime yyyymmdd hh: Set the start time for the patrol read in year/month/day
format.
maxConcurrentPD: Sets the maximum number of concurrent drives that patrol read
runs on.
5.5.2

Set Patrol Read Delay Interval

Table 5.14 Set Patrol Read Delay Interval
Convention
MegaCli –AdpPRSetDelay –Val -aN|-a0,1,2|-aALL
Description Sets the time between Patrol Read iterations on a single controller, multiple
controllers, or all controllers:
-Val: Sets delay time between Patrol Read iterations. The value is time of delay in
hours. A value of zero means no delay and an immediate restart.
5.6

BIOS-Related Properties

5-12
Patrol Read operation mode
Patrol Read execution delay value
Patrol Read status
Use the command in
time between Patrol Read iterations.
You can use the commands in this section to select the settings for
BIOS-related options.
MegaRAID Command Tool
Table 5.14 on the selected controller(s) to set the