solution provides protection to the data in the event of theft or
loss of drives.
c. Select unconfigured drives from the list of drives and click Add>
to add them to the drive group.
The selected drives appear under Span 0 below Drive Group 0,
as shown in
Figure 8.8
Span 0 of Drive Group 0
d. Click Create Span to create a second span in the drive group.
e. Select unconfigured drives from the list of drives and click Add>
to add them to the drive group.
f.
The selected drives appear under Span 1 below Drive Group 0,
as shown in
Creating a New Storage Configuration
Figure
8.8.
Figure
8.9.
8-13