9.2.10 Removing Email Addresses of Recipients of Alert Notifications
9.3
Monitoring Controllers
If MegaRAID Storage Manager cannot send an email message to the
email address, an error message appears.
Use the Email tab portion of the Alerts Notification Configuration screen
to remove email addresses of the recipients of alert notifications.
1. Click the E-mail tab on the Event Notification Configuration screen.
The E-mail section of the screen appears, as shown in
2. Click an email address in the Recipient email addresses field.
The Remove button, which was grayed out, is now active.
3. Click Remove.
The email address is deleted from the list.
When MegaRAID Storage Manager software is running, you can see the
status of all controllers in the left panel of the MegaRAID Storage
Manager window. If the controller is operating normally, the controller
icon looks like this:
appears to the right of the icon. (See
View Panel"
for a complete list of device icons.)
To display complete controller information, click a controller icon in the
left panel of the MegaRAID Storage Manager window, and click the
Properties tab in the right panel.
Figure 9.9
shows the Controller Information window.
Monitoring Controllers
. If the controller has failed, a small red circle
Section 7.2.1, "Physical/Logical
Figure
9.8.
9-13