Manage Consistency Check; Manage Background Initialization - Lenovo ThinkServer RD240 Software User's Manual

5.10.5 Manage a Consistency Check
Table 5.40

Manage Consistency Check

Convention
MegaCli –LDCC –Start|-Abort|–ShowProg|-ProgDsply –Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
Description Allows you to select the following actions for a data CC:
-Start: Starts a CC on the virtual drive(s), then displays the progress (optional) and
time remaining.
-Abort: Aborts an ongoing CC on the virtual drive(s).
-ShowProg: Displays a snapshot of an ongoing CC.
-ProgDsply: Displays ongoing CC progress. The progress displays until at least
one CC is completed or a key is pressed.
5.10.6 Manage a Background Initialization
Table 5.41

Manage Background Initialization

Convention
MegaCli –LDBI -Enbl|-Dsbl|GetSetting|-ShowProg|-ProgDsply –Lx|-
L0,1,2|-Lall -aN|-a0,1,2|-aALL
Description Manages background initialization options. The following are the background
initialization settings you can select on a single controller, multiple controllers, or all
controllers:
-Enbl, -Dsbl: Enables or disables the background initialization on the selected
controller(s).
-ProgDsply: Displays an ongoing background initialization in a loop. This function
completes only when all background initialization processes complete or you press a
key to exit.
-ShowProg: Displays the current progress value.
- GetSetting: Displays current background initialization setting (Enabled or
Disabled).
5-28
Use the command in
(CC) on the virtual drives for the selected controller(s).
Use the command in
background initialization (BGI), as well as display initialization progress
on the selected controller(s).
MegaRAID Command Tool
Table 5.40 to manage a data consistency check
Table 5.41 to enable, disable, or suspend