Lenovo ThinkServer RD240 Software User's Manual page 230

6-22
c. Enter your password when prompted.
There is no password by default for the shell. If you have set any
password from the "yellow" screen (DCUI), use that password.
You are prompted (#) next.
2. Enable ssh for remote copy.
a. Type the following command.
vi /etc/inetd.conf
b. Search for ssh in the file.
By default, the line that contains ssh has comments.
c. Remove the comment by deleting the symbol # in front of the
line.
d. Save the file and exit.
3. Restart the inetd daemon for the changes to take effect.
a. Type the following command to get the pid for inetd:
ps | grep inetd
b. Type the following command to kill the inetd process:
Kill -9 <inetd pid>
c. Type the following command to restart the inetd daemon:
#inetd
4. Type the following command to use scp to copy storelib from a
remote machine to the following path.
/lib dir scp <user@ip:path to
storelib>/libstorelib.so.2.53 /lib/libstorelib.so
5. Restart SFCB and check its status.
a. Type the following command to restart SFCB.
/etc/init.d/sfcbd restart
b. Type the following command to check the status of SFCB.
/etc/init.d/sfcbd status
Note: The updated Storelib library in the /lib directory does not
persist across reboots. Each time you restart the VMWare
MegaRAID Storage Manager Overview and Installation