8-14
Figure 8.9
Span 0 and Span 1 of Drive Group 0
g. Click Create Drive Group to make a drive group with the spans.
h. Click Next to complete this step.
The Virtual drive settings window appears, as shown in
Figure
8.10. The drive group and the default virtual drive settings
appear. The options to update the virtual drive or remove the
virtual drive are grayed out until you create the virtual drive.
Note:
The parameters in the Virtual drive settings window display
in disabled mode (grayed out) for SAS-Integrated RAID (IR)
controllers because these parameters do not apply to SAS-
IR controllers.
Configuration