8.7.2
Adding a Drive or Drives to a Configuration
Figure 8.32 Modify Drive Group Wizard
This section has the following subsections explaining the Modify Drive
Group Wizard options:
•
Section 8.7.2, "Adding a Drive or Drives to a Configuration"
•
Section 8.7.3, "Removing a Drive from a Configuration"
•
Section 8.7.4, "Changing the RAID Level of a Virtual Drive."
Caution:
Be sure to back up the data on the virtual drive before you
add a drive to it.
Follow these steps to add a drive or drives to a configuration with the
Modify Drive Group Wizard:
1. Access the Modify Drive Group Wizard screen, as shown in
Section 8.7.1, "Accessing the Modify Drive Group
2. Select the RAID level that you want to change the drive group to.
Changing a Virtual Drive Configuration
Wizard".
8-43