Properties/Operations Panels - Lenovo ThinkServer RD240 Software User's Manual

7.2.2

Properties/Operations Panels

7-6
•
Battery backup unit (BBU)
•
Tape drive
•
CD-ROM
Note: MegaRAID Storage Manager shows the icons for tape drive
devices; however, no tape-related operations are supported
by the utility. If these operations are required, use a
separate backup application.
A red circle to the right of an icon indicates that the device has failed.
For example, this icon indicates that a drive has failed:
A yellow circle to the right of an icon indicates that a device is running
in a partially degraded state. For example, this icon indicates that a
virtual drive is running in a degraded state because a drive has failed:
.
The right panel of the MegaRAID Storage Manager window has either
two tabs or three tabs, depending on which kind of device you select in
the left panel.
•
The Properties tab displays information about the selected device.
For example, if you select a controller icon in the left panel, the
Properties tab lists information about the controller, such as the
controller name, NVRAM size, and device port count. For more
information, see
"Monitoring Drives,"
•
The Operations tab lists the operations that can be performed on the
device that you select in the left panel. For example,
shows the options that are available when you select a controller.
These include enabling or silencing the alarm and running a Patrol
Read. Some types of devices, such as drive groups and ports, do
not have operations associated with them. For more information, see
Chapter 7, "MegaRAID Storage Manager Window and Menus."
MegaRAID Storage Manager Window and Menus
Section 9.3, "Monitoring Controllers," Section 9.4,
and Section 9.6, "Monitoring Virtual Drives."
.
Figure 7.4