Default System Message Logging Configuration - Cisco Catalyst 4500 Series Software Configuration Manual

Chapter 70 Configuring System Message Logging
Table 70-1 System Log Message Elements (continued)
Element
facility
severity
MNEMONIC
description
This example shows a partial switch system message:
00:00:46: %LINK-3-UPDOWN: Interface Port-channel1, changed state to up
00:00:47: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/1, changed state to up
00:00:47: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/2, changed state to up
00:00:48: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
00:00:48: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/1, changed
state to down 2
*Mar
18:47:02: %SYS-5-CONFIG_I: Configured from console by vty2 (10.34.195.36)
*Mar

Default System Message Logging Configuration

Table 70-2
Table 70-2
Feature
System message logging to the console
Console severity
Logging file configuration
Logging buffer size
Logging history size
Timestamps
Synchronous logging
Logging server
Syslog server IP address
Server facility
Server severity
Disabling Message Logging
Description
The facility to which the message refers (for example, SNMP, SYS, and so forth). For a list of
supported facilities, see Table 70-4 on page
Single-digit code from 0 to 7 that is the severity of the message. For a description of the severity
levels, see Table 70-3 on page
Text string that uniquely describes the message.
Text string containing detailed information about the event being reported.
1 18:46:11: %SYS-5-CONFIG_I: Configured from console by vty2 (10.34.195.36)
1 18:48:50.483 UTC: %SYS-5-CONFIG_I: Configured from console by vty2 (10.34.195.36)
shows the default system message logging configuration.
Default System Message Logging Configuration
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
70-12.
70-8.
Default Setting
Enabled.
Debugging (and numerically lower levels; see
Table 70-3 on page
No filename specified.
4096 bytes.
1 message.
Disabled.
Disabled.
Disabled.
None configured.
Local7 (see
Informational (and numerically lower levels; see
Table 70-3 on page
Configuring System Message Logging
70-8).
Table 70-4 on page 70-12).
70-8).
70-3