Displaying Traffic Data - Garmin G950 Pilot's Manual

DISPLAYING TRAFFIC DATA

Traffic information can be displayed on the following maps (when TIS is operating):
• PFD Inset Map
• Navigation Map Page
• Traffic Map Page
Displaying traffic information (maps other than the Traffic Map Page):
1) Press the MAP Softkey.
2) Press the TRAFFIC Softkey.
The Map - Traffic Map Page is the principal map page for viewing TIS traffic information. When traffic is
selected on maps other than the Traffic Map Page, an icon is shown to indicate the feature is enabled for display
(Figure 6-65 and Table 6-19).
Traffic
Advisory
Traffic
Status
Banner
The Navigation Map Page Setup Menu provides a means in addition to the softkey for enabling/disabling
display of traffic. The setup menu also controls the map range settings above which traffic data (symbols
and labels) are decluttered from the display. If a map range larger than the map range setting is selected, the
data is removed from the map. Maps besides the Traffic Map Page use settings based on those selected for the
Navigation Map Page.
Displaying traffic information (PFD Inset Map):
1) Press the INSET Softkey.
2) Press the TRAFFIC Softkey to display traffic data on the inset map (TRFC-1).
3) Press the softkey again to display the traffic-only inset (TRFC-2).
4) Press the softkey again to remove traffic data.
190-00870-02 Rev. A
Figure 6-65 TIS Traffic on the Navigation Map Page
Garmin G950 Pilot's Guide for the Pilatus PC-6
HAZARD AVOIDANCE
• Trip Planning Page
• Nearest Pages
• Active Flight Plan Page
Traffic Display
Enabled Icon
347