Transponder Mode Selection - Garmin G1000 Pilot's Manual

0

TRANSPONDER MODE SELECTION

Mode selection can be automatic (Altitude Mode) or manual (Standby, ON, and Altitude Modes). The
Standby, On , and ALT softkeys can be accessed by selecting the XPDR Softkey.
Selecting a transponder mode:
1) Select the XPDR Softkey to display the Transponder Mode Selection softkeys.
2) Select the desired softkey to activate the transponder mode.
STANDBY MODE (MANUAL)
NOTE: In Standby Mode, the IDENT function is inhibited.
Standby Mode can be selected at any time by pressing the STBY Softkey. In Standby, the transponder does
not reply to interrogations, but new codes can be entered. When Standby is selected, a white STBY indication
and transponder code appear in the mode field of the Transponder Data Box.
190-02692-00 Rev. A
STBY ON ALT
1 2 3 4
STBY Mode (white code
number and mode)
Figure 4-33 Standby Mode
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga
XPDR
IDENT
VFR CODE IDENT
Pressing the BACK Softkey
returns to the top-level softkeys.
5 6 7 IDENT
Pressing the BACK Softkey returns to the mode selection softkeys.
AUDIO PANEL AND CNS
BACK ALERTS
BKSP BACK ALERTS
129