Keyboard Shortcuts - NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual

NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
remove Remove instances in the running configuration
save-running Save the running configuration
set Set property values of the running configuration
Example 2: Type "get" TAB+TAB to see a list of keywords for the get command.
netgear115C00# get
association Associated station
basic-rate Basic rates of radios
bridge-portBridge ports of bridge interfaces
....
vapVirtual Access Point
web-serverWeb server
wme-queueTransmission queue parameters for stations
Example 3: Type get ssh s TAB. This results in completion with the only matching keyword:
netgear115C00#
get ssh status
Press ENTER to display the output results of the command.

Keyboard Shortcuts

The CLI provides keyboard shortcuts to help you navigate the command line and build valid
commands. Table C-1
Table C-1 Keyboard Shortcuts
Keyboard Shortcut Action on CLI
Ctrl-a Move the cursor to the beginning of the current line
Ctrl-e Move the cursor to the end of the current line
Ctrl-b Move the cursor back on the current line, one character at a time
Left Arrow key
Ctrl-f Move the cursor forward on the current line, one character at a time
Right Arrow Key
Ctrl-c Start over at a blank command prompt (abandons the input on the current line)
Ctrl-h Remove one character on the current line.
Backspace
Ctrl-w Remove the last word in the current command.
(Clears one word at a time from the current command line, always starting with the
last word on the line.)
C-2
describes the keyboard shortcuts available from the CLI.
v1.0, May 2006
Command Line Reference