NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
Table C-14 Advanced IP Settings (continued)
Task
Set the Primary DNS Server
Set the Secondary DNS Server
Set the Primary WINS Server
Set the Secondary WINS Server
Set the Lease
Hotspot Settings
The commands in
Table C-15
Advanced heading.
Table C-15 Hotspot Settings
Task
View all HTTP redirect information
Enable HTTP Redirect
Disable HTTP Redirect
Set the URL for the redirect
Advanced Wireless Settings
The commands in
Table C-16
Advanced heading. For information about the configuration options in this section, see
"Configuring Advanced Wireless Settings" on page
Table C-16 Advanced Wireless Settings
Task
Enable Super-G Mode
Disable Super-G Mode
Set the RTS Threshold
Set the Fragmentation Length
Threshold
Command Line Reference
Command
set dhcp-server dns1 <ip_address>
set dhcp-server dns2 <ip_address>
set dhcp-server wins1 <ip_address>
set dhcp-server wins1 <ip_address>
set dhcp-server lease <seconds>
correspond to the Hotspot Settings page on the Web UI under the
Command
get http-redirect detail
set http-redirect status up
set http-redirect status down
set http-redirect url <url>
correspond to the Wireless Settings page on the Web UI under the
Command
set radio wlan0 super-ag yes
set radio wlan0 super-ag no
set radio wlan0 rts-threshold <0-2347>
set radio wlan0 fragmentation-threshold <256-2346>
v1.0, May 2006
4-3.
C-17