NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual page 83

NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
Table B-1 Access Point Default Configuration Settings
Feature
Remote Management
SSH
SNMP
Public Community Name
Private Community Name
Community Name for Traps
IP Address to Receive Traps
DHCP Server Settings
DHCP Server
Starting IP Address
Ending IP Address
Netmask
Lease
Wireless LAN Parameters
Super-A/G Mode
RTS Threshold
Fragmentation Length
Beacon Interval
DTIM Interval
WMM Support
SpectraLink Support
Other Settings
MAC Access Control
Rogue AP Detection
Activity Log
HTTP Redirect
Wireless Bridging and Repeating
*. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will
vary. Network conditions and environmental factors, including volume of network traffic, building materials
and construction, and network overhead, lower actual data throughput rate.
Specifications
Description
Enabled
Enabled
public
private
NETGEAR WAG302v2
0.0.0.0
Disabled
192.168.0.2
192.168.0.50
255.255.255.0
86400 Seconds (1 Day)
Disabled
2,346
2,346
100
1
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
v1.0, May 2006
B-3