Rogue Ap Detection - NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual

NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
Table 3-2 explains the fields on the Statistics page.
Table 3-2 Access Point Statistics
Field
Wired Ethernet
Packets
Bytes
Wireless Interface
Unicast Packets
Broadcast Packets
Multicast Packets
Total Packets
Total Bytes
Refresh button

Rogue AP Detection

The WAG302v2 can detect rogue APs and wireless stations and exclude them from connecting to
the WAG302v2 Wireless Access Point.
To enable Rogue AP Detection:
1. From the WAG302v2 main menu under Information, click Rogue AP Detection to view the
page shown in Figure
2. Check the Turn Rogue AP Detection On radio box to enable Rogue AP Detection and click
Apply.
If you enable Rogue AP Detection, the AP continuously scans the wireless network and
collects information about all APs heard on its channel.
3. Click Rescan to discover the APs.
4. Click Grant to add any AP to the Known AP List.
5. Click Delete to remove an AP from the list.
6. Click Save to export the list of known APs to a file. A window opens so you can browse to the
location where you want to save the file. The default file name is WAG302Rogue.cfg
3-12
Description
Received/Transmitted
The number of packets sent since the WAG302v2 was restarted.
The number of bytes sent since the WAG302v2 was restarted.
Received/Transmitted
The Unicast packets sent since the WAG302v2 was restarted.
The Broadcast packets sent since the WAG302v2 was restarted.
The Multicast packets sent since the WAG302v2 was restarted.
The Wireless packets sent since the WAG302v2 was restarted.
The Wireless bytes sent since the WAG302v2 was restarted.
Click the Refresh button to update the statistics on this screen.
3-9.
v1.0, May 2006
Management and Information