NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual page 81

This appendix provides default factory settings and technical specifications for the ProSafe
802.11a/g Dual Band Wireless Access Point WAG302v2.
Default Factory Settings
You can use the reset button located on the rear panel of your device to reset all settings to their
factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button
for three seconds. Your device will return to the factory configuration settings shown in
Table B-1 Access Point Default Configuration Settings
Feature
AP Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
Ethernet Connection
Ethernet MAC Address
Port Speed
Basic Settings
AP Name
Country / Region
IP Address
Subnet Mask
DHCP Client
Spanning Tree Protocol
VLAN (802.1Q)
Specifications
Description
192.168.0.230
admin
password
See bottom label.
10/100
netgearxxxxxx, where xxxxxx are the last six digits of the
wireless access point's MAC address
United States (in North America; otherwise, varies by
region)
192.168.0.230
255.255.255.0
Disabled
Enabled
Enabled
v1.0, May 2006
Appendix B
Specifications
Table B-1.
B-1