Wireless Client Security Separation; Vlan Id - NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual

NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
• Passphrase. To use the Passphrase to generate the WEP keys, enter a passphrase and click the
Generate Keys button. You can also enter the keys directly. These keys must match the other
wireless stations.
• Key 1, Key 2, Key 3, Key 4. If using WEP, select the key to be used as the default key. Data
transmissions are always encrypted using the default key. The other keys can only be used to
decrypt received data.
• WPA Pre-Shared Key. If using WPA-PSK, enter the passphrase here. All wireless stations
must use the same passphrase (network key). The network key must be from 8 to 63 characters
in length.
Note: Security Profiles that share the same type of network authentication must
share the same passphrase or keys. Security Profiles that use WEP must
share the same four keys, but they do not need to use the same default key.

Wireless Client Security Separation

If enabled, the associated wireless clients will not be able to communicate with each other. This
feature is used for hotspots and other public access situations. The default is disabled.

VLAN ID

Enter a VLAN ID from 1-4094 to assign traffic from wireless clients to a VLAN. When a wireless
client uses this Security Profile, the traffic is tagged with the VLAN ID you specify. To assign
multiple Security Profiles to the same VLAN, enter the same VLAN ID for each profile. The
default VLAN ID is 1. If you enter a VLAN ID that is not the default, make sure the VLAN ID
matches the VLAN ID that switches and other network devices use on the LAN.
The VLAN assigned to the first Security Profile (default name: NETGEAR) is the management
VLAN. By default all traffic on the WAG302v2 uses VLAN 1, which is the default untagged
VLAN. Therefore, all traffic is untagged until you change the untagged traffic VLAN ID on the
Basic Settings page or assign a different VLAN ID to the Security Profile.
2-18 Basic Installation and Configuration
v1.0, May 2006