NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
Table C-9 Security Profile Settings (continued)
Task
Set the WEP Keys
Set Network Authentication to
802.1X
Set Network Authentication to
WPA
Set Network Authentication to
WPA2
Set Network Authentication to
WPA and WPA2
Set the WPA Passphrase
Set Network Authentication to
WPA with RADIUS
Set Network Authentication to
WPA2 with RADIUS
Command Line Reference
Command
set interface wlan0 wep-key-1 <key>
Note: For 64-bit WEP, use 5 ASCII characters or 10 Hex characters. For
128-bit WEP, use 13 ASCII characters or 26 Hex characters. For 152-bit
WEP, use 32 hexadecimal or 16 ASCII characters.
Example (64-bit WEP with ASCII):
set interface wlan0 wep-key-1 abcde
set interface wlan0 wep-key-2 fghi
set interface wlan0 wep-key-3 klmno
set interface wlan0 wep-key-4 pqrst
set interface wlan0 security dot1x
set interface wlan0 security wpa-personal
set bss wlan0bssvap0 wpa-allowed on
set bss wlan0bssvap0 wpa2-allowed off
set interface wlan0 security wpa-personal
set bss wlan0bssvap0 wpa-allowed off
set bss wlan0bssvap0 wpa2-allowed on
set interface wlan0 security wpa-personal
set bss wlan0bssvap0 wpa-allowed on
set bss wlan0bssvap0 wpa2-allowed on
set interface wlan0 wpa-personal-key <key>
Example
set interface wlan0 wpa-personal-key "KeY!"
or
set interface wlan0 wpa-personal-key My!KeY
set interface wlan0 security wpa-enterprise
set bss wlan0bssvap0 wpa-allowed on
set bss wlan0bssvap0 wpa2-allowed off
set interface wlan0 security wpa-enterprise
set bss wlan0bssvap0 wpa-allowed off
set bss wlan0bssvap0 wpa2-allowed on
v1.0, May 2006
C-11