Remote Management - NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual

NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual

Remote Management

To access the Remote Management screen:
1. Enter the LAN address of the WAG302v2 into the address field of your browser.
2. After you log in, click Remote Management under Management on the main menu.
Figure 3-2
3. Enter the Remote Management information.
• Secure Shell (SSH): If set to Enable, the Wireless Access Point will only allow remote
access via Secure Shell and Secure Telnet. The default is Enable.
• SNMP: Enable SNMP to allow the SNMP network management software, such as HP
OpenView, to manage the wireless access point via SNMPv1/v2 protocol.
• Public Community Name: The community string to allow the SNMP manager to read the
wireless access point's MIB objects. The default is public.
• Private Community Name: The community string to allow the SNMP manager to read
and write the wireless access point's MIB objects. The default is private.
• Community Name for Traps: The community string associated with the IP address to
Receive Traps. There is no default value.
• IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent
from the wireless access point. The default is 0.0.0.0.
4. Click Apply to save your settings.
3-2
v1.0, May 2006
Management and Information