NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
Table C-16 Advanced Wireless Settings (continued)
Task
on
Set cwMin and cwMax
station-to-AP traffic
on station-
Set TXOP Limit
to-AP traffic
Advanced Access Point Settings
The commands in
Table C-17
the Advanced heading.
Table C-17 Advanced Access Point Settings
Task
Enable Wireless Bridging and
Repeating
Disable Wireless Bridging and
Repeating
View the Local MAC Address for
the Wireless Bridge or Repeater
Set the Remote MAC Address 1
Set the Remote MAC Address 2
Set the Remote MAC Address 3
Set the Remote MAC Address 4
Command Line Reference
Command
set wme-queue wlan0 with queue <Queue_Name>
to cwmin <cwmin_Value> cwmax <cwmax_Value>
Example:
set wme-queue wlan0 with queue vi cwmin 7 cwmax 15
set wme-queue wlan0 with queue <Queue_Name>
to txop-limit <txop-limit_Value>
Example:
set wme-queue wlan0 with queue vo to txop-
limit 49
correspond to the Access Point Settings page on the Web UI under
Command
set interface wlan0wds0 status up
set interface wlan0wds0 radio wlan0
set interface wlan0wds0 status down
get interface wlan0wds0 mac
set interface wlan0wds0 remote-mac
<remote_MAC_address>
set interface wlan0wds1 remote-mac
<remote_MAC_address>
set interface wlan0wds2 remote-mac
<remote_MAC_address>
set interface wlan0wds3 remote-mac
<remote_MAC_address>
v1.0, May 2006
C-19