Table of Contents
Advertisement
5. Push back on the tab for the cable harness to release the bundle of cables.
6. Lift the cable bundle from the harness.
7. Unplug the AC power cable from the rear of the system. See letter "A" in the
following figure.
8. Lift up on the power supply to remove it. See letter "B" in the figure.
Note: While lifting the system to remove it, carefully untangle the power supply cables inside the
system if necessary.
9. Slide the rear edge of the replacement power supply into place, lining up with the
rear of the server system. See letter "A" in the following figure.
10. Set the front of the power supply down, ensuring it sits behind the metal tab in the
bottom of the system. See letter "B" in the figure.
11. Plug in the AC power cable at the rear of the system. See letter "C" in the figure.
12. Push the bundle of cables into place between the drive carriers and the wall of the
system.
13. Insert the cable bundle into the cable harness and then close the harness over the
cables.
®
Intel
Server System SR1520ML User's Guide
B
Figure 31. Removing Power Supply
A
AF002524
39
Advertisement
Table of Contents
