Table of Contents
Advertisement
6. Disconnect the power and data cables from the drive.
7. Remove the four screws that attach the hard drive to the drive carrier. Lift the drive
from the carrier. Store the drive in an anti-static bag.
8. If you are installing a new drive, skip the remaining steps and refer to
Hard Drive" on page
9. Insert the screws that held the drive in the carrier into the screw locations on the
carrier to store them for future use.
10. Set the drive assembly into place in the chassis. See letter "A" in the figure below.
11. Attach the drive assembly to the chassis with the screws that you removed earlier.
See letter "B" in the figure below.
®
Intel
Server System SR1520ML User's Guide
B
Figure 13. Removing Drive Carrier
16. Begin with step 6.
A
AF002603
"Installing a
19
Advertisement
Table of Contents
