Installing And Removing The Rack Handles; Installing The Rack Handles; Figure 44. Installing The Rack Handle - Intel SR1520ML - Server System - 0 MB RAM User Manual

Installing and Removing the Rack Handles

Installing the Rack Handles

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Attach the rack handle to the server system with two screws as shown by letters
"A" and "B" in the figure below.
4. Repeat step 3 on the opposite side of the server.
5. Plug all peripheral devices and the AC power cable into the server.
56
iii.
A

Figure 44. Installing the Rack Handle

B
AF002527
®
Intel Server System SR1520ML User's Guide
"Safety