Table of Contents
Advertisement
Server System Features
2. Do one of the following:
-
Insert the power supply module into the power supply cage and push all the way until it
clicks into place (see letter B).
-
If no power supply is to be installed, install the filler panel into the power supply cage.
To replace the power supply on a fixed power supply system, follow these steps:
-
Remove screws shown in letter A and pull the power supply upper as shown in letter B.
40
Figure 63. Removing the power supply module
Figure 64. Installing the power supply module
Figure 65. Installing the filler panel
®
Intel
Server System R1000EP Service Guide
Advertisement
Table of Contents
