Install An Additional Hot Swap Power Supply Module; Figure 43. Removing Power Supply Filler Panel; Figure 44. Installing Additional Hot Swap Power Supply Module - Intel SC5300 User Manual

Install an Additional Hot Swap Power Supply Module

NOTE
This step only applies to chassis with redundant power supply capability. Do not perform this step
if your chassis has a fixed power supply.
1. Loosen screw (letter "A") and remove power supply filler pane (letter "B").
2. Insert power supply module until it clicks into place. Secure with screw (letter "A") if shipping
chassis to another location

Figure 44. Installing Additional Hot Swap Power Supply Module

Intel® Server Chassis SC5300 User Guide
B

Figure 43. Removing Power Supply Filler Panel

A
A
TP00543
TP00544
Setting Up the Chassis
33