Removing the Rack Handles
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the two screws holding the rack handle in place, and remove the rack
handle from the server system as shown by letters "A" and "B" in the figure below.
4. Repeat step 3 on the opposite side of the system.
5. Plug all peripheral devices and the AC power cable into the server.
®
Intel
Server System SR1520ML User's Guide
iii.
B
Figure 45. Removing the Rack Handle
"Safety
A
AF002526
57