Intel SR1520ML - Server System - 0 MB RAM User Manual page 69

9. Install the system memory. For instructions, see
Notes:
•
Use caution when connecting cables to make sure you do not pinch any cables.
•
For data cable routing information, see
•
For power cable routing information, see
10. Connect the cables at the front of the server board.
— Main power. The cable end is labeled P1 for the server board at the right and P2
— Front panel (letter "E")
— Sys_fan_3 (letter "D")
11. Connect the cables at the rear of the server board.
— USB_2_3 (letter "C")
— SATA_0 (letter "B")
®
Intel Server System SR1520ML User's Guide
for the server board at the left. Several cables lay underneath this connector. Be
sure the cables do not get pinched in the connector. See letter "A" in the
following figure.
"Installing DIMMs" on page
"Cable Routing" on page
"Cable Routing" on page
30.
71.
71.
49