9. If present, remove the protective shipping cover from the replacement processor.
10. Orient the replacement processor with the processor socket so that the processor cut-
outs match the socket notches (see letter "A" in the following figure). Install the
replacement processor (see letter "B").
Caution:
11. Lower the processor load plate (see letter "A" in the following figure). With your
finger, push down on the load plate (see letter "B"). Lower the socket lever until it is
fully latched (see letter "C").
Intel® Compute Module MFS5000SI User Guide
Figure 23. Removing Protective Shipping Cover
The underside of the processor has components that may damage the
socket pins if installed improperly. Processor must align correctly with
socket opening before installation. DO NOT DROP processor into socket.
A
Figure 24. Orienting and Installing Processor
A
Figure 25. Lowering Load Plate and Socket Lever
AF002222
B
AF002223
C
B
AF002224
21