Installing DIMMs
DIMM slots are numbered as follows:
Populate DDR2 FBDIMMs in the following order:
1. A1, B1, C1, D1, then
2. A2, B2, C2, D2
To install DIMMs:
1. Observe the safety and ESD information at the beginning of this manual and in the
appendices.
2. If the compute module is installed in a server system, see
Module from the Server System" on page 7
3. Remove the top cover. For instructions, see
on page
Intel® Compute Module MFS5000SI User Guide
DIMM A2
DIMM A1
Figure 28. DIMM Slot Order
8.
DIMM B2
DIMM C1
DIMM B1
DIMM C2
DIMM D1
DIMM D2
Branch 0
Branch 1
AF002452
for removal instructions.
"Opening and Removing the Top Cover"
"Removing a Compute
25