Front Panel Connectors And Indicators; Hardware Requirements; Processor; Memory - Intel MFS5000SI - Multi-Flex Server Compute Module User Manual

J3A3: BIOS Bank
Select

Front Panel Connectors and Indicators

Hardware Requirements

To avoid integration difficulties and possible board damage, your system must meet the
requirements outlined below.

Processor

The Intel® Compute Module MFS5000SI supports up to two Multi-Core Intel® Xeon®
Processors 5xxx Series.

Memory

A minimum of two fully-buffered DDR2 667 MHz DIMM(s) (FB-DIMM) should be
installed. Additional DIMMs must be installed in pairs, up to eight total.
Intel® Compute Module MFS5000SI User Guide
1-2 If these pins are jumpered, the BIOS will be forced to boot from the
lower bank. These pins should not be jumpered for normal operation.
2-3 These pins should have a jumper in place for normal system
operation. (Default)
A USB1 Port
C Video Connector
E NIC1 and NIC2 Activity LEDs
G ID LED
I Fault LED

Figure 5. Front Panel Connectors and Indicators

A B C D
B USB2 Port
D I/O 1 and I/O 2 Activity LEDs
F Drive Activity LED
H Power Button
J Power LED
E F G H
J
I
AF002408
5