Blackberry PRD-10459-003 - Enterprise Server For IBM Lotus Domino Administration Manual page 87

Administration Guide
Configure a BlackBerry Router to permit BlackBerry device activations over the
enterprise Wi-Fi network
1. On the computer that hosts the BlackBerry® Router, on the taskbar, click Start > Programs > BlackBerry
Enterprise Server > BlackBerry Server Configuration.
2. On the OTA WIFI Activation tab, select the Permit wireless activation in your WLAN environment check box.
3. Optionally, to restrict the BlackBerry Router so that it acts as a gateway for wireless activations over the
enterprise Wi-Fi® network and not as a gateway for other network traffic such as email messages, data, or
calendar synchronization, select the Prevent all serial bypass traffic through this router except WLAN
activations check box. Only restrict the BlackBerry Router if you configured more than one BlackBerry Router
instance.
4. To specify how the BlackBerry Router locates the SMTP server, in the Activation Gateway Settings section, select
one of the following options:
• To permit the BlackBerry Router to determine which SMTP server it uses for ETP traffic based on the mail
exchange record of the host domain, select Use MX Lookup to obtain SMTP server.
• To provide the SMTP server name and port number for the BlackBerry Router, select Explicitly provide SMTP
server name and port. Type the server name and the server port number for the SMTP server.
5. If the SMTP server requires authentication, specify the SMTP login name and SMTP password.
6. In the From address for ETP messages field, type the email address that you want to use as the From address.
The ETP message is the email message that the BlackBerry Router sends to the users' mailboxes during the
activation process.
7. Click Apply.
8. Click OK.
9. In the Windows® Services, restart the BlackBerry Router.
After you finish: Instruct users to activate the Wi-Fi enabled BlackBerry devices.
Activate a Wi-Fi enabled BlackBerry device
If you want to activate a Wi-Fi® enabled BlackBerry® device using the enterprise Wi-Fi network, you can instruct a
BlackBerry user to perform the following task on the BlackBerry device. If you want to reactivate a BlackBerry device,
you must create a new activation password for the BlackBerry device.
1. On the BlackBerry device, in the device options, click Advanced Options.
2. Click Enterprise Activation.
3. Type the activation email address.
4. Type the activation password.
5. In the Activation Server Address field, type the IP address for the BlackBerry Router that the BlackBerry device
can use to activate over the enterprise Wi-Fi network.
6. In the menu, click Activate.
After you finish:
• For more information, see the user guide for the BlackBerry device.
Assigning BlackBerry devices to user accounts
85