Configure Peap Configuration Settings In The Wi-Fi Profile On A Blackberry Device - Blackberry PRD-10459-003 - Enterprise Server For IBM Lotus Domino Administration Manual

Administration Guide
Users cannot find the certificate synchronization tool in the BlackBerry Desktop
Manager
Possible cause
The certificate synchronization tool was not installed when the user installed the BlackBerry® Desktop Manager.
Possible solution
Instruct the user to re-install the BlackBerry Desktop Manager using the custom installation option. During the custom
installation process, the user can install the certificate synchronization tool.
Configure PEAP configuration settings in the Wi-Fi profile on a BlackBerry
device
If you do not configure the PEAP configuration settings using the BlackBerry® Administration Service, instruct users
to configure the settings in the Wi-Fi® profile on the BlackBerry device.
1. On the BlackBerry device, in the device options, click Wi-Fi Connections.
2. Click the Wi-Fi profile that you want to configure.
3. Click Edit.
4. In the Security Type list, select PEAP.
5. Type the user name and password for the messaging server.
6. In the CA certificate list, click the certificate for the authentication server.
7. Select the Inner link security type.
8. If your organization does not use EAP-MS-CHAPv2, if necesssary, in the Token list, select the token type.
9. If necesssary, in the Server subject field, type the server name in the server certificate, in URL format (for
example, server1.domain.com or server1.domain.net). If you leave the field blank, the BlackBerry device skips
over it during server authentication.
10. If necesssary, in the Server SAN field, type the alternative name for the server, in URL format (for example,
server1.domain.com or server1.domain.net). If you leave the field blank, the BlackBerry device skips over it
during server authentication.
11. If your organization uses dynamic IP addresses, verify that the Automatically obtain IP address and DNS option
is selected.
12. Verify that the Allow inter-access point handover option is selected.
13. If necesssary, select the Prompt before connection check box. If you do not select the check box, the BlackBerry
device connects to an available wireless access point automatically.
14. If necesssary, select the Notify on authentication failure check box.
15. If necesssary, select the VPN profile.
Configuring PEAP authentication
215