Blackberry PRD-10459-003 - Enterprise Server For IBM Lotus Domino Administration Manual page 170

Administration Guide
6. Click Save all.
After you finish:
• To configure the BlackBerry MDS Connection Service to retrieve the status of certificates from an OCSP server
or CRL server, you must configure the OCSP server and CRL server information.
• Add the communication information that you configured for the DSML server to the BlackBerry MDS Connection
Service configuration set.
Related topics
Assign a BlackBerry MDS Connection Service configuration set to a BlackBerry MDS Connection Service instance, 170
Add communication information to a BlackBerry MDS Connection Service configuration set, 169
Restarting BlackBerry Enterprise Server components, 327
Configure the OCSP servers that the BlackBerry MDS Connection Service uses to
retrieve the status of certificates
You can configure the BlackBerry® MDS Connection Service to authenticate to OCSP servers on behalf of BlackBerry
devices and to retrieve the status of certificates.
1. In the BlackBerry Administration Service, on the Servers and components menu, expand BlackBerry Solution
topology > BlackBerry Domain > Component view.
2. Click MDS Connection Service.
3. On the OCSP tab, click Edit component.
4. Perform the following actions:
• Configure the BlackBerry MDS Connection Service to accept OCSP servers that BlackBerry devices specify.
• Configure the OCSP handler to use the OCSP responder extension in a certificate.
5. Perform one of the following tasks:
Task
Create an OCSP server configuration.
Change an existing OCSP server configuration.
6. Click Save all.
168
Configuring a BlackBerry MDS Connection Service to trust web servers
b. In the Settings section, change the DSML certificate
server settings.
c. Click the Update icon.
Steps
a. In the Name field, type the OCSP server name.
b. In the Service URL field, type the web address for the
server.
c. Click the Add icon.
a. Click the Edit icon that is beside the OCSP server that
you want to change.
b. In the Settings section, change the OCSP server
settings.
c. Click the Update icon.