Interface Configuration - NETGEAR GS108T-200NAS Software Administration Manual

GS108T and GS110TP Smart Switch Software Administration Manual
Figure 2-26
To configure global DHCP filtering settings:
1. In the Admin Mode field, select Enable or Disable to turn the DHCP Filtering feature on or
off.
2. Click Apply to apply the change to the system. Configuration changes take effect
immediately.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.

Interface Configuration

Use the DHCP Filtering Interface Configuration page to view and configure each port as a trusted
or untrusted port. Any DHCP responses received on a trusted port are forwarded. If a port is
configured as untrusted, any DHCP (or BootP) responses received on that port are discarded.
To access the DHCP Filtering Interface Configuration page, click System Services  DHCP
Filtering  Interface Configuration.
2-46
v1.0, April 2010
Configuring System Information