NETGEAR GS108T-200NAS Software Administration Manual page 45

Table 2-2. SNTP Global Status Fields (continued)
Field
Last Attempt Status
Server IP Address
Address Type
Server Stratum
Reference Clock Id
Server Mode
Unicast Sever Max Entries
Unicast Server Current
Entries
Click Refresh to refresh the page with the most current data from the switch.
SNTP Server Configuration
Use the SNTP Server Configuration page to view and modify information for adding and
modifying Simple Network Time Protocol SNTP servers.
To display the SNTP Server Configuration page, click System  Management  Time  SNTP
Server Configuration.
Configuring System Information
GS108T and GS110TP Smart Switch Software Administration Manual
Description
Specifies the status of the last SNTP request or unsolicited message for both
unicast mode. If no message has been received from a server, a status of
Other is displayed. These values are appropriate for all operational modes:
• Other: None of the following enumeration values.
• Success: The SNTP operation was successful and the system time was
updated.
• Request Timed Out: A directed SNTP request timed out without receiving
a response from the SNTP server.
• Bad Date Encoded: The time provided by the SNTP server is not valid.
• Version Not Supported: The SNTP version supported by the server is not
compatible with the version supported by the client.
• Server Unsynchronized: The SNTP server is not synchronized with its
peers. This is indicated via the 'leap indicator' field on the SNTP message.
• Server Kiss Of Death: The SNTP server indicated that no further queries
were to be sent to this server. This is indicated by a stratum field equal to 0
in a message received from a server.
Specifies the IP address of the server for the last received valid packet. If no
message has been received from any server, an empty string is shown.
Specifies the address type of the SNTP Server address for the last received
valid packet.
Specifies the claimed stratum of the server for the last received valid packet.
Specifies the reference clock identifier of the server for the last received valid
packet.
Specifies the mode of the server for the last received valid packet.
Specifies the maximum number of unicast server entries that can be
configured on this client.
Specifies the number of current valid unicast server entries configured for
this client.
v1.0, April 2010
2-9